EUI-Guest Configuration for Android Tablet
The below guide has been tested on Android Tablet 3.2 (Honeycomb). Screenshots are taken from Honeycomb thus may slighlty differ from other Android-based devices depending on firmware version and make and customisation of your device:
- Firmware 1.6 (Donut) or above must be installed.
- WiFi must be enabled (depending on the make, either via hardware or software switch);
- Wifi network settings must be set to DHCP.
In Wireless & networks menu, tap Wi-Fi settings:
Figure 1. Network settings
From the list of available networks, tap EUI-Guest:
Figure 2. Available wireless networks
The default web browser will open up automatically  with EUI's Authentication screen: authenticate with username and password provided on your personal EUI Guest Receipt:
Figure 3. EUI Authentication screen
Once access is granted, the Acceptable Use Policy (AUP) will be displayed inside your browser.
You now have successfully configured your device to connect to EUI-Guest.
Your device will automatically connect to EUI-guest whenver it is in range and your wireless card is enabled and turned on.
Please Note: to save power, Android will connect to any wireless service only when it is required. If you find at times you don't have a connection, it may be because Android has decided it has no use for it at the time.
= If this should not happen, please open your preferred browser manually.