Skip to content
Home » Services and Admin » ICT Service » Network » EUI-Guest » EUI-Guest for Windows 7

EUI-Guest Configuration for MS Windows 7


The below guide has been tested on Windows 7 Professional and is based on Windows' default wireless configuration tool (Wireless Zero Configuration).
Screenshots are taken from Professional version thus may slightly differ from other versions (e.g. Home Premium, etc.).




  • Proper drivers for your wireless network card must already be installed. Windows 7 has a huge list of built-in drivers but if there is none suitable for your card, you should refer to your card vendor's Web site and download the proper one. Advice on installing and setting up your network card can be provided by Portable Device Support.
  • Your network card must be enabled and turned on (depending on the make, either via hardware or software switch).




  1. Click on the Wireless Connection icon in the tray bar (usually bottom right corner) of the desktop: a list of available WiFi networks will show up:


    Figure 1: Available WiFi networks


  2. Select EUI-Guest and click on Connect to proceed:


    Figure 2: Connecting to EUI-Guest


  3. Open your default web browser at the URL You will receive the following Authentication screen: authenticate with the username and password provided on your personal EUI Guest Receipt:

    Figure 3: EUI Authentication screen

    Figure 3: EUI Authentication screen


  4. Once access is granted, the yellow alert triangle will disappear from the WiFi icon in the traybar and the Acceptable Use Policy (AUP) will be displayed inside your browser:

    Figure 4: EUI-Guest connected and authenticated

    Figure 4: EUI-Guest connected and authenticated


You now have successfully configured Windows 7 to connect to EUI-Guest.

Your device will automatically connect to the network whenever it is in range and your wireless card is enabled and turned on.




Page last updated on 17 August 2017

Go back to top of the page